THMP-1 Buttkicker 200W Pearl

Opis

RSeat Europe introduces you the Pearl THMP-1 Throne Thumper, the vibration generator better than the Buttkicker Gamer 2 !
Pearl has developed in partnership with ButtKicker this vibration generator which is normally intended to profesionnals acoustic market. The base which strongly resembles the Buttkicker Gamer 2 is, however a completely new design. It is more imposing , more powerful and powered by a 200W amp ! It will vibrate your seat to the rhythm of your conduct, vibrators , shocks, music, sounds and engines in order to accentuate the low frequencies. It adapts to the majority of seats in the fixing on the frame.

RSeat Europe delivers the THMP1 with a Jack / RCA cable instead of the Jack / Jack cable so you can connect it to a standard RCA output.

Careful to read : As for the Buttkicker Gamer 2, an audio RCA (cinch) or 3.5 mm jack output is required for connecting the amplifier ! If you do not have this type of analog output your system is incompatible , no exchange will be given for this type of incompatibility.

At the back of your audio source (TV, amplifier , home theater …. ) you will recover the signal from left channel (usually a white RCA marked “L” or “LEFT” ) , the Xbox and Playstation has no analog output natively. On televisions and stereo amplifier or home theater is generally indicated : :(AUDIO OUT, AUDIO OUTPUT or LINE OUT) On the PC and a sound system plugged into the back ( or its motherboard card ) the system will run under Windows with the latest drivers . To recover the signal to the Buttkicker , plug the adapter 3.5mm jack / RCA on its front output (usually the headphone jack ) and connect the amp Pearl THMP -1 to it. Then give the information to your sound drivers that the connection should be front speaker .

Package Contents

Everything you need to attach the Pearl THMP-1 to your audio system is included!

• Pearl THMP-1 Throne Thumper with Easy Clamp™ attachment mechanism
• Pearl THMP-1 Power Amplifier 220-240V – 50/60Hz 1A
• Jack to RCA

Product Specifications

Power Amplifier

• Dimensions: 17 x 13 x 8 cm
• Weight: 1,6 kg
• Power Output: 200 watts @ 4 ohms
• Frequency Response: 50-250Hz
• Input Type: Jack 6.35mm
• Cooling process: Natural conduction

Pearl THMP-1 Throne Thumper Transducer

• Diameter: 11cm
• Internal Mass of the piston: 453g
• Frequency Response: 10-250 Hz
• Weight: 2,5 kgs
• Nominal Impedance: 4 Ohm
• Power Handling: 75 watt min. / 400 watt max.
• Installation: Easy Clamp™